HAAS Super Mini Mill
Mini Mill
 |
|
Equipment and Features
Haas Super Mini Mill fitted with 10,000 rpm spindle, 30 M/Min rapids & A HAAS 5C indexer.
Machine Specification
TRAVELS: X Axis 16 " 406 mm, Y Axis 12 " 305 mm, Z Axis 10 " 254 mm
Spindle Nose to Table (~ max) 14 " 356 mm, Spindle Nose to Table (~ min)4 "
102 mm
TABLE: Length 36 " 914 mm, Length (Work Area) 28.75 " 730 mm, Width 12 "
305 mm
T-Slot Width 5/8 " 16 mm, T-Slot Centre Distance 4.33 " 110.0 mm, Number of
Std T-Slots 3
Max Weight on Table (evenly distributed) 500 lb 227 kg
SPINDLE: Max Rating 15 hp 11.2 kW, Max Speed 10,000 rpm, Max Torque
17 ft-lb @
4600 rpm 23 Nm @ 4600 rpm, Drive System Direct Speed Belt Drive, Taper
BT or CT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled
FEEDRATES: Rapids on X 1200 in/min 30.5 m/min, Rapids on Y 1200 in/min
30.5 m/min,
Rapids on Z 1200 in/min 30.5 m/min, Max Cutting 833 in/min 21.2 m/min
AXIS MOTORS: Max Thrust X 2000 lb 8896 N, Max Thrust Y 2000 lb 8896 N,
Max Thrust Z 2000 lb 8896 N
TOOL CHANGER: Type Carousel, Capacity 10, Max Tool Diameter (full) 3.5 "
89 mm, Max Tool
Weight 12 lb 5.4 kg, Tool-to-Tool (avg) 2.8 sec, Chip-to-Chip (avg) 3.8 sec
GENERALS: Air Required 4 scfm, 100 psi 113 L/min, 6.9 bar, Coolant
Capacity 40 gal 151 L
POA